🤔👉What should you do if you bought a design for 3 mm material and you have material for 3.20 mm and the elements match after cutting? 😃👉Remember that the designs are made for a specific material thickness. It happens that you buy 3mm material that is actually 3.20mm and then the design will not fit because the thickness will be greater than the holes in the design. This can be easily corrected by increasing the entire design by a percentage corresponding to the thickness of your material. E.g. If you have 3.20mm and the project is for 3mm, you increase whole projekct by 1.067 and you have a slightly larger project for 3.20mm material.
And if your material is 1/8 inch (3.175 mm) and the project is for 3 mm, then enlarge this project by 105.84% and you will have it for material 1/8 inch (3.175 mm)
Buy more for less
Enter the coupon codes after selecting the designs in your cart and the discount will be applied to the entire order